Make an Appointment

Edit Template

WELD TESTER TE1600/RS232

WELD TESTER TE1600/RS232

The TE1600/RS232 “WELD TESTER” is a portable instrument purposely designed for measuring the parameters of resistance welding. By using the RS232 port and by means of a female DB9serial cable, the measurement instrument may be connected to a PC for displaying and recording the measured data. Our TE1600/RS232 transfers the data acknowledged by the PC after each measurement automatically, without needing to press any button. By using probes of different kind, the same instrument enables to measure both the welding current and the force at the electrodes. The power of the 32-bit microprocessor and the accuracy of the 12-bit AID converter make the instrument a highly performing one. It is suitable for measuring on standard machines in alternate current (AC), direct current three-phase rectified and medium frequency machines (DC) and capacitor discharge machines

Measures the true effective value (RMS), maximum value and average value; the peak value: positive and negative values; the conduction angle in degrees; the welding time in cycles & in cycle steps.

The average value, the maximum value and the welding time in ms.

Measures the welding time in ms; the current true effective value (RMS); the current slope up time; the maximum RMS current value; the current slope down time.

With programmable time gap; it prevents the measurement errors when the slope function is used and it allows the checkout of the correct first insertion delay.

Stores the values measured during the last 10 welds.

Measures the welding force, the maximum force value, the value at the beginning and at the end of the welding time.

It prevents the measurement errors due to high impact force and it allows to estimate the latter.

Wide availability of measurement transducers. including air pressure transducers. Automatic recognition of the connected sensor, BNC output to display the current wave-shape on oscilloscope. Supply by means of alkaline batteries 4 x 1.5 V (size AA).

Test & Measuring Instruments

Our Products

Working Hours

Sun - Fri :

9.30 Am - 6:00 Pm

Contact Us

F-135, MIDC, Ambad, Nashik, Maharashtra, India - 422010

+91-253-6622907, +91-253-2992734, +91-8600134655 (Landline)

© 2025 Created By blMedias 

Her old collecting she considered discovered. So at parties he warrant oh staying. Square new horses and put better end.

Mon-Sat:

09:00 Am - 11:00 Pm

Quick Links

Home

About Us

Our Services

Emergency Plumbing

Contact Us

Blog

Services Offered

Pipe Repairs & Replacement

Water Heater Installation

Drain Cleaning Services

Leak Detection & Repair

Bathroom & Kitchen Plumbing

Customer Support

24/7 Emergency Plumbing

Licensed & Insured Technicians

Affordable Rates & Transparent Pricing

Satisfaction Guarantee

Request a Free Quote

Service Area Map

© 2024 Created with Royal Elementor Addons